Texon Refinery Serbia > PRODUCTS> METALWORKING OILS AND FLUIDS

Quality level: ISO L-QC.

Packing: 180 kg

Highly refined mineral oils, without additives and of the highest purity. They are characterized by excellent oxidation and thermal stability.
 
They are intended for classical hardening alloy and high alloy steel and are produced in three ISO viscosity grades: 32, 46 i 68.

Quality level: ISO L-MHE; SRPS B.H3.526.

Packing: 10 l and 180 kg

Mineral oils intended for mechanical processing of metal cutting at different speeds.

They provide excellent lubrication, protect against wear and corrosion and carry away the heat well. They are produced in five ISO viscosity grades: 15, 22, 32, 46 i 68.

Packing: 10 l and 180 kg

Oil for electro-erosion metalworking. It is used as dielectric fluid in machines for processing electro-erosion metalworking.

Recommended for use in machinery manufacturers such as Charmilles, Ingersoll, Schiess-Nassovia, Agie, AEG-ELOTHERM, CDM and others.

Packing: 10 l and 200 l

Emulsifying mineral oil, used in easy and medium conditions of cutting processing: scraping, milling, drilling and cutting; low alloy steel, grey cast iron, brass and bronze.
 
Recommended concentration is from 4% to 6%.

Packing: 10 l and 200 l

Mineral emulsifying oil, used in severe conditions of cutting processing: milling, drilling, boring, scraping, thread cutting and broaching; alloy steel, grey cast iron, aluminum. Provides enhanced corrosion protection of the final product.
 
Recommended concentration is from 4% to 6%.

Packing: 10l and 200 l

Emulsifying mineral oil, used in the most difficult conditions of cutting processing: milling, drilling, boring, scraping, deep drilling, thread cutting and broaching; aluminum, stainless steels and titanium. Not recommended for non-ferrous metals processing.
 
Recommended concentration is from 3% to 5%.

Packing: 10 l and 200 l

Semi-synthetic water-soluble fluid, used in easy and medium terms of cutting processing: grinding, scraping and milling; low alloy steel, gray cast iron and ductile iron, brass and bronze.
 
Recommended concentration is from 4% to 8%.

Packing: 10 l and 200 l

Semi-synthetic water-soluble fluid, used in severe conditions of cutting processing: grinding, scraping, milling and drilling; alloy steel, grey cast iron, brass and bronze.
 
Recommended concentration is from 3% to 8%.

Packing: 10 l and 200 l

Synthetic water-soluble fluid, allows exceptional cooling and a very good corrosion protection of a final product, in easy and medium processing conditions. Flat and cylindrical grinding and scraping; low alloy steel, grey cast iron.
 
Recommended concentration is from 5% to 7%.

Packing: 10 l and 200 l

Synthetic water-soluble fluid which provides an exceptional cooling and a very good corrosion protection of a final product in difficult conditions of cutting processing. Grinding, scraping and thread cutting; alloy steel, gray cast iron and ductile iron.
 
Recommended concentration is from 3% to 5%.